Friday, September 6, 2019
Gender Differences in Religious Belief Essay Example for Free
Gender Differences in Religious Belief Essay Critically examine the relationship between gender, religious participation and religious organisation Studies of religious belief verify consistently that the female gender shows greater participation to religion than that of males. This greater commitment to religion described by sociologists such as Bensen applies throughout the course of the womanââ¬â¢s life, and as noted by Glock and Stark, their greater pledge to religion is consistent regardless of the religious organization, whether it be New Religious movements, New Age spirituality, or traditional faiths. Beit-hallahmy and Argyle state that whether it is a matter of private churchgoing or private prayer and regardless of religious belief women appear more religious than men. Religions universally have been found to be deeply oppressive to women, born from ancient teachings indicating their inferiority to men. Writers like de Beauvoir and Sadwai see religion and religious ideology as playing a part in maintaining male domination that is found in many aspects of contemporary social life. In religious scriptures women take the lesser position; De Beauvoir highlights how scriptures in most religions suggest that ââ¬Å"man is master by divine rightâ⬠and Aldridge explains how in the Quââ¬â¢ran women are legally inferior to men. Why, then, do women pursue a faith which encourages their oppression, more so than the gender with the power to dominate it? Biological factors begin with Miller and Hoffmanââ¬â¢s explanation that women take fewer risks than men and as a result seek to conform to a groups religious identity rather than undertake the challenge of authority and autonomy. Men more often reject the religious beliefs of the mainstream and engage in risk-taking behaviors. According to Stark this risk taking inclination in a man to not ââ¬Å"think aheadâ⬠means that men are less religious because they are willing to take a gamble on there not being an afterlife. However sociologists like Freese and Montgomery debate this argument works on an assumption that everyone makes the same risk assessment when in fact men are just more prepared to take that risk. Roth produced a study which showed there to be a smaller gap between genders in the percentage who believe in an afterlife but a large gap in those who give attendance and prayer to religion, suggesting women just participate actively more than men. Armstrong states that biological differences between men and women gave way to male domination; patriarchal montheism has replaced polysthetic beliefs which promoted the role of the female in society, for which evidence was found by archeologists in the form of old statues of goddesses. He argues that natural male aggression was the tool used to manipulate religion into a patriarchal institution. The socializations built upon this biology, are of men to be strong and domineering, and of women to be passive, obedient, and nurturing, which according to Mol, are the qualities associated with religiosity. Miller and Hoffman establish that gender socialisation makes women more cooperative and caring, and this can leads to many explanations for their greater participation in religion. One is their role of guardians in family life. Bruce states that womenââ¬â¢s child bearing and rearing experiences for instance develop their traits as nurturers as opposed to confrontational and goal seeking. Luckmann further explains that women have a greater responsibility for rearing children and participate to a lesser degree in the labor force, leaving them with more time for church-related activities and a greater need for a source of personal identity and commitment. Women are more likely to take on the task of the moral development of their child along with the rest of their duties in socializing a child. There is an expectation for women to be defenders of tradition and Halman and Draulans note that these roles give women a greater focus on the family. Luckmann also highlights how womenââ¬â¢s role as a housewife gives them lesser participation in the labor force, leaving them with more time for church-related activities and a greater need for a source of personal identity and commitment. They are more likely to experience status frustration, born from the constraints of housework and childcare or the unsatisfying lower middle class jobs which are mainly done by women. Religious participation can reinstate identity and give women focus, because where men gain individuality through work, women revive their low sense of worth through religion. Religious faith and practice can enhance psychological well-being by being a source of comfort to women in times of distress and by enhancing their social interaction with others in places of worship. More responsive and sensitive personality traits in a woman mean they are more likely to contemplate emotional wellbeing and not only seek solace in religion bit find meaning and purpose in life. Personality was be attested as a key factor by Thompson, who found that men who possess those qualities more commonly found in women, such as sensitivity , were similarly more likely to be religious. Reasons other than oppression that lead a higher percentage of women to respond to their environment and pursue happiness through religion are the increased levels of poverty they experience. Official figures show women are 14% more likely than men to live in households with incomes that are 60% below the national average. More frequently diagnosed mental illness and depression in women can explain their higher contribution to religion, as cults, sects as a social network and comfort for women outside the isolation of the home or of their minds. Womenââ¬â¢s tend to be more open about sharing personal problems and are more relational than men which is encouraged in the close knit community of a sect. The intimacy of the private sphere can also replicate womenââ¬â¢s ââ¬Å"sphere of the homeâ⬠whilst theodicies explaining their feelings and offering solutions justify their role as a woman. New Religious Movements such as cults are also generally more popular with women because of cult focus on self-discovery and fulfilment, which correlates with the female inclination towards self-criticism and self-improvement, due to their suffering higher levels of marginalisation and lack of self-confidence. Some evidence contradicts the male role as non-spiritual however, as Davie found there is an equal spiritual confidence in the existence of ghosts between genders. A key to understanding modern womenââ¬â¢s higher participation in religion is the shifts in demographic trends. Brierlyââ¬â¢s study found that in 1979 the proportion of male church goers were 45% but in 1989 it had dropped to 42%. The ratio of live females to live males rises steadily and correspondingly a disproportionate number of elderly women seek refuge in the church in response to loneliness or consoling philosophy nearing the end of their lives. Davie explains how women are more actively responsive to religion because males and females have differing visions of God; males associate him with power and status whereas women associate with his traits of love, comfort and forgiveness which explains their greater involvement in community religions. They are more concerned with people orientation than control. Female differences in nature also explains the particular appeal of New Age ideas revolved around well-being and stress relief. Concepts such as herbalism, yoga and meditation, homeopathy, aromatherapy and massage, horoscopes, astrology, fortune-telling are strongly associated with females, according to Glendinning and Bruce. This recent marketization of religion often promotes earthly concepts which are more linked to femininity and female empowerment than the tradition of male domination. Mother Gaia, the theory of Mother Earth as a living entity, is more appealable to women for instance. Womenââ¬â¢s heightened spirituality can be attributed to their greater role in biological life processes. Walter and Davie see women as more emotionally exposed to the ââ¬Å"ups and downsâ⬠of life because of childbirth, and their nurturing role as teachers, care assistants, social workers, and so on, and also the expectation that they be unpaid carers for vulnerable family members. This heightens their sensitivity and attunes the spiritual dimension of human existence, because as Davie argues, these factors give women a closer association with birth and death which are generally central concepts of religion. As females live longer than men some studies have shown that many widowed women may turn to religion for the comfort of reassuring philosophies and social networks. It is possible that some women take refuge from some of the theoretical oppressions bore by religion. Swatos talks of the fulfilment that can be had from being a second class citizenship. Feminist writers like Walby and be Beauvoir suggest that the doctrine of many of the worldââ¬â¢s religions contain an ideology of the family which emphasises womenââ¬â¢s traditional roles as wives and mothers in the family. Some women, however, are happy to take on this role. Barrett and Pryce, for instance, highlight how Rastafarianism assumes the womanââ¬â¢s position as a housewife and mother as a protection from sexual and racial abuse in the outside world. On one hand this gives ultimate power to men by denying female participation to society in the name of protection, but some more introverted Rastafarian women may enjoy this safety within the sphere of the home. A similar contradiction of female subjugation is the veil; whilst Aldridge notes the hijab in Islamic cultures as a symbol of patriarchy, degrading women to a state of invisibility and keeping them devoid of identity, some women find anonymity to be protective from the judgement and sexual degradation of men. A growing number of Western Muslims have taken to wearing the veil to in fact reinstate a female identity separate from their face; writers like Ahmed and Watson argue that the veiling of oneââ¬â¢s face can be a way to resist the patriarchy and sexual objectification of Western culture which views women as visual objects. Faiths as a majority oppose the admission of women to leadership in religious organisations. A pun of the ââ¬Å"stained glass ceilingâ⬠is used as a pun by sociologists to explain how women are maintained at the bottom of the career ladder to authority within the church, and barred completely from the priesthood in Roman Catholicism and Orthodox Judaism, which is seemingly discriminatory, but perhaps female role models within religious doctrines presented as meek and nurturing figures have had such an influence on the identity of a religious women that they feel more comfortable in a non-domineering role. Examples can be taken from any religion proving the sub-ordinance of women taught by most faith systems. The socialisation of women to be obedient and take on the follower role means they are further likely to be a willing follower of religion. Overall social, psychological, and biological factors interlink to form explanations for greater female participation in religion and religious organisation. The gravity of female relation to religion as an explanation, compensator, duty, and social outlet mean that their commitment is likely to persist regardless of the injustices and subjugations it bears upon the gender.
Thursday, September 5, 2019
Radiation Protection Personal Protective Equipment
Radiation Protection Personal Protective Equipment Introduction: The assignment, consist of three parts including this introduction, which mentions how the assignment will take shape. Ideas and concepts taken from elsewhere for the preparation of this document will be cited appropriately within the work. The document which will be given to staff will address the issues pertaining to the appropriate use of personal protective equipment(PPE), legislations associated with their use, the principles of physics behind their use. The document will briefly delve in to issues pertaining to radiation hazards and protection, legislations relevant to radiation work in United Kingdom and use of personal protective equipment. Principles of physics behind radiation protection methods will be addressed in the document. Commonly used PPE in radiographic departments will be explained with their appropriate use along with personnel dosimetry. Local rules aiding radiation protection and defining PPE use will be also addressed in the document. Radiation protection methods and appropriate use of PPE will be given in a tabular format explaining where, when and why these protection methods and PPE should be used for those situations. The third section of this work will include a conclusion which will include the reasoning behind the composition of the document. It will also briefly address other important radiation protection issues and methods which are not addressed in the documents and the reasoning behind it. It will demonstrate how the assignment brief has been addressed by the document. The conclusion segment of this assignment will also emphasise as to why understanding of the work produced is important. The main factors aiding the preparation and decisions made for the preparation of the document will also be included in the conclusion. At the end of the work all references used in the preparation of this work will be laid out in the Harvard system of referencing. Radiation Protection and the use of Personal Protective Equipment. Introduction: Being at the leading edge of radiation dose delivery, a radiographer has a unique professional duty towards himself and others around him for a reduction in the hazards caused by ionising radiation (Manning, 2004). Many radiation related fatalities and injuries suffered by radiation pioneers and scientific studies of the 1950s, which implicated low level doses to stochastic effects in radiation workers and patients led to the radiation protection regulations of today (Bushong, 2003). Radiation hazards When humans are irradiated, atomic interactions results in ionisation, this can lead to chemical and biological changes which are damaging to the cells and chromosomes. This radiation induced changes can lead to two distinct types of injuries at cellular level. Deterministic effects: Above a certain threshold dose, effects show up and the severity of the effects increase with dose Stochastic effects: Probability of occurrence of effects increases with increase in dose. The effects include cancer induction and hereditary effects in future generations (Martin and Harbison, 2006). These late stochastic effects, has led to the radiation protection regulations of today (Bushong 2003). What is Radiation protection and why do it In light of the hazards that could be caused by radiation, protection from unnecessary radiation gains paramount importance. All radiation workers and patients should be protected against these hazards by various methods and equipment, this process is called radiation protection. A system of linear non threshold (LNT) model for radiation protection is applied to all radiation practices (Martin 2004). There is also increasing opinion in favour of radiation hormesis(Carver 2006), but since there is no absolute evidence to suggest a lower threshold below which no damage occurs the LNT model as required by current legislations is considered appropriate to estimate risks at low doses(Matthews and Brennan 2008) The patient should only be exposed if the clinical evidence suggests that the patient is likely to benefit from the procedures. The law requires the doses to be kept to as low as reasonably practicable (ALARP), so the requirement of radiation protection is laid out by various legislations (Graham et al.,2007). The regulations relevant to radiographic work and the use of PPE in United Kingdom (UK) Ionising Radiations Regulations 1999(IRR 1999) Ionising Radiations (Medical Exposure) Regulations 2000 (IR(ME)R) Management of Health and Safety at Work Regulations 1999 Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations 1995(RIDDOR 1995) Personal Protective Equipment at Work Regulations 1992 Manual Handling Operations Regulations 1992 Control of Substances Hazardous to Health Regulations 2002 (COSHH) (Messer, 2009) The recommendations of The International Commission for Radiation Protection(ICRP), that radiation exposure to radiation workers and the patient should be As Low As Reasonably Achievable(ALARA) is generally accepted(Engel-Hills,2006), The recommendations of ICRP and the European union(EU) euratom directives have all had a significant impact on British law (Whitley et al., 2005) Principles of Radiation Protection IR(ME)R requires all medical exposures in diagnostic radiology to apply the radiation protection principles of justification, optimisation and dose limitation. (Institute of Physics and Engineering in Medicine(IPEM), 2002). These principles ensure patient dose is kept to the ALARP principle. The cardinal principles of radiation protection will be further discussed. Minimising Time: As the dose is directly proportional to duration of exposure, minimising the time of exposure results in reduced dose. Minimising the time spent near a radiation source also reduces exposure. This protection method finds its use in fluoroscopy. Other methods used in fluoroscopy, using this protection method to reduce exposure is pulsed progressive fluoroscopy and the regular interval reset timers (Bushong, 2001). Maximising Distance: The cheapest form of radiation protection is afforded by the inverse square law, which states that the radiation intensity varies to the inverse of the square of the distance (Farr and Allisy-Roberts 1997). This law holds true for the primary beam which is considered a point source of radiation. While using mobile x-ray units a radiographer can avail this principle of physics to get maximum protection by standing as far away from the source as possible with the aid of the long cable which should be at least 2metre from the x-ray tube during exposure (Bushong 2001). Dowd (1991) considers distance to be the simplest and most effective of radiation protection measures. Maximising Shielding: Maximising shielding between the radiation source and exposed personnel reduces radiation exposure considerably. The effectiveness of the shielding material is estimated in terms of its half-value layer(HVL), which is the amount of material needed to reduce radiation exposure in to half, and tenth-value layers(TVLs); which is the amount of material needed to reduce exposure to one tenth of its original amount. The preferred material for shielding is lead (Pb). The physics behind the usage of lead for protection is its high atomic number (82). This high atomic number ensures that a majority of scatter photons gets absorbed due to its high attenuation. PPE used in radiography departments: Lead Aprons: They are made from powdered lead incorporated in a binder of rubber or vinyl. They come in various lead equivalencies. If used as a secondary barrier to absorb scattered radiation an apron with lead equivalency of at least 0.25mm should be used. Lead aprons shall be at least 0.5mm of lead equivalent for fluoroscopy but can be higher to the range of 1mm of lead equivalence. The downside of greater lead equivalent aprons is the greater weight. Now manufacturers make aprons with composite materials-a combination of lead, barium and tungsten. They have reduced weight and provide better attenuation of radiation. Lead Gloves: They provide at least 0.25mm or more of lead equivalent protection. Used mainly in fluoroscopy or by people holding patients during examination. Thyroid Shields: Mainly for use while performing fluoroscopy, these offers protection to thyroid. Mobile Shields: These could be moved around and are sometimes used in angiography. Protective Eyewear: Protective glasses are used mainly in fluoroscopy to protect against the cataractogenic effect of radiation(Dowd and Tilson 1999). The concept used for radiation-protection practices is the effective dose(E). Effective dose considers the relative radio sensitivity of various tissues and organs. Effective Dose(E) =Radiation weighting factor(Wr) x Tissue weighting factor(Wt) x Absorbed dose (Bushong, 2001) Personnel Dosimetry: All classified radiation workers are routinely monitored for radiation exposures using personnel monitors. Though they do not provide any radiation protection on their own, they offer the quantity of radiation to which the person using the monitor was exposed. The commonly used dosimeters in diagnostic radiology are film badges, Thermoluminescent dosimeters(TLD) and the pocket dosimeter (Thompson et al.,1994). Local Rules which will include working procedures and protocols for the department should be always followed for the appropriate use of PPE Protective Methods/PPE usedng 2001,Bushong 2003) Conclusion: Writing an assignment about the appropriate use of PPE for radiation protection, the need to highlight radiation hazards was considered important and so the assignment started with a brief outlook of radiation hazards and subsequently radiation protection concept was discussed with emphasis on why staff and patients must be protected. The LNT dose response model for radiation protection and new concept favouring lower doses such as radiation hormesis was briefly addressed. The justification for using the LNT model for radiation protection was also emphasised. The legal requirement for radiation protection of patients and staff was discussed and legislations relevant to radiographic work in UK and other organisations influencing British law on radiation safety was discussed. Recommendations of ICRP, as low as reasonably achievable( ALARA) concept and the IR(ME)R requirements of radiation protection of patient through the principles of justification, optimization and limitation was also addressed. These introductory explanations, was considered important as they were the basis for the subject for radiation protection and highlighted the need for radiation protection in diagnostic imaging departments. Preparing the core of the work was not possible without addressing the cardinal principles of radiation protection, hence they were all discussed briefly, where these protection principles find its application for radiation protection in radiographic departments. Time, Distance, Shielding concepts of radiation protection was discussed. Distance and Shielding concept of radiation protection was discussed in detail as they find their use quite often in imaging departments. Material commonly used for shielding with the principles of physics behind its usage was also addressed. Concepts such as half -value layer(HVL) and tenth value layers (TVLs), used to define the effectiveness of the shielding material was also detailed. Personal protective equipment generally used in imaging departments such as lead rubber aprons, lead rubber gloves, thyroid shield, protective eye wear, mobile shield was discussed. Their appropriate usage in specific areas was also considered. Concept of effective dose was also briefly discussed as this was considered an important concept in radiation dose. Personnel dosimetry was discussed with a brief on the various types of personnel dosimeters used in diagnostic imaging departments, as these dosimeters play an important role in dose regulation and monitoring radiation exposure in staff. Radiation protection methods to reduce patient dose has not been elaborated and special arrangements for pregnant radiographer such as rotating out of high exposure areas such as mobile x-ray and fluoroscopy and wearing a secondary badge under the apron at waist level when involved in such examinations to measure foetal dose(Dowd and Tilson 1994) has not been addressed in the document, so as to keep the assignment within its permissible constraints. With all this being presented, it was decided to summarize the use of PPE and protection methods in various areas of a radiographic department; x-ray room, while using mobile x-ray equipment in wards and theatres, Fluoroscopy which is a major contributor of staff dose(Bushong 2001) and CT was considered. It was decided to project these points in a tabular format within the document for simplicity and to meet the assignment brief within the imposed limitations. It also demonstrates the appropriate usage of PPE and radiation protection methods. Adequate shielding in diagnostic imaging departments both primary and secondary shielding as required by legislations, means that a radiographer is sufficiently protected from the scatter, as long as they position themselves behind the protective barrier during exposure. This point is stressed within the tabular column in the document as this is considered an important radiation protection practice. X-ray tube incorporates lead shielding to attenuate the radiation travelling in any other direction other than the useful beam. The housing of the tube have a lead equivalent of typically 2.5mm (Farr and Allisy-Roberts 1997). This greatly reduces scatter or leaked radiation exposure to staff and patient. These and other protection measures incorporated with in modern x-ray machines such as collimation, beam alignment, filtration and other manual protective measures to reduce patient dose-including specific area shielding, such as contact shields and shadow shields which provide gonadal pr otection to patients have not been discussed in the document due to the scope and constraints of the assignment. All radiation protection methods employed to reduce patient dose bring down staff exposure as well, so good radiographic practice helps achieve reduced dose to both patient and staff (Graham et al., 2007) Local rules as required by IRR 1999, to be a part of all departments which involves working with ionising radiation has been addressed in the document briefly, but they are an important resource towards radiation protection as these rules include written systems of work, including protocols and procedures for the imaging department. Details of contingency plans and the names of Radiation protection advisers(RPA) and Radiation Protection Supervisors(RPS) are contained within the rules(Graham et al.,2007) Principles of physics, pertaining to the use of lead in the preparation of shielding materials have been discussed in the assignment. Reading the document will inform the reader about the appropriate use of PPE, as to where, when and why to use these PPE. It also informs the reader the various legislations associated with radiation protection and the use of PPE in UK. It also highlights the hazards caused by ionising radiation and the need for radiation protection. Hence the assignment brief has been addressed. Radiation protection is an important subject to be considered in the diagnostic radiography department (Moores, 2006) and hence a clear understanding of radiation protection issues is important. Ionizing radiation can cause real damage to current and future generations if not dealt with carefully, hence understanding radiation protection and the correct usage of PPE in aiding radiation protection through this work is considered important. Together with a wide range of resources, the valuable experience gained during the clinical placement in a radiography department, observing the safety practices and usage of PPE in the imaging departments and critical self evaluation of methods and practices using the aid of published works has helped me arrive at the key decisions which are addressed in the document. 1
Wednesday, September 4, 2019
The Methods Of Recruitment And Selection Commerce Essay
The Methods Of Recruitment And Selection Commerce Essay Organizations are made up of two key resources: people and money. People, who consist as its workforce, are the most valued asset (Plumbley 1976). The knowledge, skills and commitment the workforce brings has to be utilized to its maximum to enable the organisation thrive. Plumbley (1985) suggests that the profitability and even the survival of an organization normally relies upon the calibre of the workforce, and it has been debated that the costs of ineffectual commercial viability can most likely be linked to a long period of ineffective recruitment and selection methods (Lewis, 1984; Plumbley, 1985; Smith and Robertson, 1993; Terpstra, 1996). More so the processes involved with recruitment and selection of employees, their management and availability of skills and knowledge will give an enterprise a firm business strategy. Recruitment and selection are crucial processes for a successful organization, as hiring the appropriate staff can improve and sustain organisational performance (Petts 1997). Recruitment is simply linking those with jobs and those seeking jobs; in effect discovering the potential of prospective applicants for actual or anticipated vacancies. According to Edwin B. Flippo, recruitment is nothing but a process of searching for prospective candidates for employment, stimulating and encouraging them to apply for a job. An adequate recruitment process would consist of such progressive steps: Job definition, Person specification, Creation of recruitment and selection techniques, review and shortlist and offer of employment based on agreed contract (Peel and Dale 2001:9). Figure Recruitment and Selection Process (Ward 2007) In reality, the entire recruitment process is more complicated than just encouraging people. It targets the purpose of attracting the most suitable people at that point in time (Dale 2003:50). Invariably the problem of selection not only involves allocating the right individual for the right job, but it also entails the efficacy of the methods employed in order to achieve that purpose (Dempsey 1955). The entire process of selection starts from an initial screening interview and concludes with a final employment offer. Figure The Selection Process (Montana, Charnov 2000:216) While carrying out the selection process, management must have an answer to the question: What is required by the job? As such, any criterion taken into account in employee selection must be a Bona fide Occupational Qualification (BFOQ), or job related criteria to avoid any form of discrimination that is an illegality and punishable (Montana, Charnov 2000). Case Study Review Company Profile Framley engineering is a relatively small sized organisation that designs, develops, manufactures and sells superior electronics. A large proportion (60%) of the companys revenue is derived from export markets; hence the company has a strong market interested in the unique products offered. The organizations existence is hinged on the vital recruitment of RD engineers who are pioneers of in house technology and responsible for launching new products for the market. The company consist of 520 employees, 57 being engineers. The company is expanding due to the periodical recruitment of qualified engineers that are essential to its existence. With the following SWOT analysis, the companys current situation can clearly be presented: Strengths Framley engineering is a small sized company in comparison to its larger competitors but holds a first mover advantage (FMA), where it has been able to gain time over its competitors; and time advantage generally and in the field the company operates is the surest way to gain market share (Lieberman, Montgomery 1988). Weakness Lack of an effective recruitment and selection strategy by the Human Resource department, as a result of the incompetence of the Head of Human Resources and departmental heads using inadequate interviewing and selection skills for recruiting new engineers. This could be detrimental as it could reduce the companys competitiveness in the market as its success is dependent on quality engineers. Opportunities Steadily expanding through employing qualified engineers and across-the-board low labour turnover. Threats The recruitment of people with no relevant skills or knowledge, who are unfit for the organization as highlighted by the Director of Engineering at Framley engineering. This can lead to increased labour turnover, increased costs for the organization and eventually lower the morale of the workforce. Examining the SWOT analysis of the case study, it can be gathered that a major setback for Framley engineering is its grossly incompetent Head of Human Resource and departmental heads. The heads of department clearly lacked interviewing and selection skills basing decisions on personal grounds and prejudices which could be interpreted as a form of discrimination, possibly stereotyping or assigning of traits to people based on their social background. Although stereotyping is a natural mental process that enables the mind filter and categorizes stimuli, it becomes a stumbling block when recruiters view the aged, obese, sex and ethnic minorities within intransigent boundaries, assuming them as less qualified for a post based on their affiliation to a social group (Levesque 2005). An example is the case of James Connor (Greenhouse 2003), who was offered a job as a cook by McDonalds. Connor was 6 ft. tall and weighed 420 pounds therefore the chain had to order a customized uniform for hi m in which during the time of its arrival, the chain had changed management and the new owners decided against employing Mr Connor on account of his obesity. Thus it can be assumed that the new owners commits the perceptual blunder of the halo effect (Klein 2004) in deeming that because of one insignificant negative characteristic, their total perception of him and his abilities is distorted negatively (McShane et al 2005:19). Furthermore the effects of poor recruitment decisions as observed in the case study include: wastage of time and money spent on advertising, shortlisting, interviewing, saying good bye and re-hiring; negative individual and team morale where existing staff have to compensate for the new persons lack of skill or productivity. A major pitfall is the direct costs with having to re-recruit, estimated by the CIPD as à £3,500 per employee on the average (Management and Standards Centre n.d.). Effective Recruitment and Selection Strategies Recruitment Recruiting is seen as a positive process of generating a pool of candidates by reaching the right audience, suitable for the vacancy (Leopold 2002). The initial progression of recruitment is to create a job analysis which is vital for both the organization and applicants. If the post is needed in the organization, a job description is then collated. A typical job description comprises of the job title, location and what the job key functions are principal duties the job entails and the part it plays in the success of an organization. Thereafter, based on the job description a person specification can be composed. In definition, a person specification is a process by which both the required qualities vital to undertake the post and the desirable qualities of the ideal candidate for the job are described (Torrington et al 1992). In line with the case study, a job description should solely be created by the Human Resource department at Framley engineering. Though it is recommended that the HR Head confers with the Director of engineering (for required skills), whom the new recruits will be reporting to; as their relative input into the job role will be imperative and such relevant details which should be included in the specification. The next level is choosing appropriate steps in recruiting the best applicant. In effect there are three channels by which an organizations can recruit suitable candidates, there are: Internal, External and On-line recruitment. Internal recruitment involves advertising job posts on staff notice boards in staff rooms or announcing in staff meetings. Acknowledged by Leopold (2002), internal recruitment enables staff to progress within the organization through promotion to a new area, thereby providing them with valuable experience elevating them to a higher level in a similar role. For example, Tesco adopts internal recruitment calling it an Internal Talent Plan where it lists current employees looking for a move either on the same level or on promotion. The advantage of internal recruitment is that the manager is aware of the candidates capabilities thus avoiding the error of employing an external candidate who may not be motivated to commit to the development of the organization. In contrast, a significant obstacle of internal recruitment is that it may introduce a sense of indifference within the organization. Wherefore sometimes it is preferable to employ externally which could increase competition for promotions and improve appraisals, as employees will not feel as though they are in their comfort zone, knowing the organization employs internally. External recruitment involves recruitment agencies, job centres, referrals and new paper adverts. External recruitment is when a candidate is recruited from outside the organization as the candidate may bring creative ideas or skills needed. In relation to Framley engineering, the company employs externally, which is appropriate for its size, structure and field they operate in being the recruitment of RD engineers. The company needs outside experience which brings an injection of fresh and innovative ideas. Though this technique maybe costlier, it is essential to keep the company in operation as it is reliant on the quality of engineers and in house technology. The last recruitment technique is online recruitment which is a cost effective method for organizations as it shares information between candidates and recruiters, and information gathered can easily be updated. Though its major drawback is that it attracts series of unsuitable candidates and recruiters spend a lot of time extracting suitable ones (Beardwell 2007). Framley engineering should adopt this cost effective method as part of their recruitment policy though to fully utilize the method, recruiters must be in regular contact with potential candidates so that they are not lost to competition. Another example is Hong Kong airline Dragon Air, a subsidiary of Cathway Pacific Group which employs 1400 cabin crew staff. The airline uses online recruitment for costs and time saving as candidates submit their resume in fixed format through the internet. They also employ third party agencies such as Monster.com where data is consolidated and analysed by the quality of the candidate. Thi s has proved effective in employing the right workforce and can be emulated by Framley. In correlation, the next step in hiring applicants is assessing the adequate candidate for the post through sifting applications (Armstrong 2007). The sifting process encompasses classifying abundant applicants into probable, possible and unsuitable groups (Beardwell 2007). This is achievable through the comparison of different resumes and passing promising candidates to the selection process. Unsatisfactory should be notified in writing soonest according to CIPD directives (Beardwell 2007). Another technique that can be used in sifting applications is Bio data, which is the collation of data that consists of demographic information such as education, sex, age, educational qualifications, employment history, and hobbies etc. points are awarded according to their relevance to the post and data collected is scored by the bio data survey. The points accumulated determine applicants who can proceed to the next stage (Armstrong 2007). Selection Selection can be interpreted as the process of picking the appropriate candidates both inclined and capable to fill the post. Several selection techniques can be used to recognize the most suitable candidate for the post by reducing the pool (Leopold 2002). The several techniques could be: psychometric tests, assessment centres, interviews, references amongst others (Beardwell 2007). The most widely used technique is interviews as expressed by Torrington (2002), as a controlled conversation with a purpose. There are three types of interviews namely: individual interview, selection board and interviewing panels, the most common one being the individual interview which is more or less face to face. This allows close contact between the interviewer and interviewee, but may result in partial decisions based on personal grounds like depicted in the case study. It is glaring that the departmental heads did not comprehend the whole process of recruitment. They lacked the training required to enlighten them about the importance of the recruitment process and creating a strategy to effectively deal with hiring the right people, equal opportunities, minimizing costs from wrong hiring, and more importantly to identify marginal performers prior to hiring. Definitely, untrained and incompetent recruiters combined with inappropriate selection techniques will result in a workfo rce not being sufficiently qualified for the post they hold, which suffocates an organization as it gradually gets crushed under the pressure of rehiring adequate employees that forms the backbone of the company; as in this case Framley engineering. A much fairer method which may eradicate preconceived judgements is a panel interview, likely involving two line managers and one personnel manager to interview a single candidate. This allows fair discussions with a view from different angles. The last method is selection board interviews which is usually larger and more formal, and might have someone on the board more influential than others whose decisions might influence others on the board. This kind of interview enables people involved to make decisions on candidates according to relevant points. Framley engineering should adopt the panel interview method as it is more dynamic and candidates are assessed in a fairer manner as set of questions asked will be based on individual experiences. Other selection techniques is assessment centres, which entails candidates going through a series of exercises while being observed by assessors what skills were demonstrated, their capabilities and if they are suitable for the job to enhance the development of the organization (Fowler 1992). Tasks performed at assessment centres are psychometric tests, group, job and individual exercises (Porter 2001). However, although this method gives a look into how people would perform in groups which would be an advantage to organizations that require staffs to work in groups, it is among many techniques and the best way to understand and select a suitable candidate is through interview. Moreover the process can be very costly as it requires a lot of resources, hence mainly used by larger organizations therefore not suitable for Framley engineering. However, another technique which might be useful to the case study is using references. References are personal and accurate information gathered about applicants. This would enable the company know who they are recruiting. The downside of this method is that candidates can get anyone to write up a personal reference as Armstrong (2007) rightly pointed out that personal references are of course evidently useless as all they indicate is that the candidate has at least one or more friends. Thus, references should only come from Human resources and not from a previous manager or former workmate as they will be biased and conjure up a brilliant reference which is not beneficial as the organization needs to know the calibre of applicants they are recruiting. For an organization to adopt the best approach to recruitment and selection there are several external and internal factors to be taken into consideration before an ideal strategy can be formulated. Such factors shall be analysed furthermore. Internal Factors Foremost is the size of an organization as this determines what strategy to adopt. An organization with between 200 and 500 employees, as is the situation in the case study, would need to adopt a best use of techniques mentioned here. However much smaller firms with 50 plus employees do not require adopting all techniques mentioned as it is inadequate, time consuming and counterproductive due to relatively high costs. For example assessment centres are not needed by smaller firms as this would be expensive, and instead use of practical methods such as interviews and paper application. But assessment centres are invaluable to larger organizations recruiters will need to narrow down the large number of applicants as effectively used by corporations like British Gas that uses assessment centres where they use 90 statements in all and applicants are rated as amber, green or red. The colour grading shows the attitudes applicants have towards team building and people, therefore it goes to show which roles are best suited for an individual. Green and amber applicants are put forward unto the last stage while red ratings are not taken any further. The financial position of an organization also plays a crucial role as it has a major impact on the recruitment and selection policies an organization chooses. If a body is financially buoyant it can apply all the techniques but if otherwise can prove a weakness for organizations as strict budgets means limitations to techniques that can be employed to attract potential applicants. Consequently, it can be determined that when taking into consideration the internal factors, firms need to conform to their internal factors when choosing what recruitment and selection method to adopt. It can be seen that not all organizations can adopt the best practices due to size and financial constraints, however it is clear that all businesses can adopt the basic of recruitment and selection being interviews and applications. External Factors Political factors (macro environmental factors) such as government policy and legislation on race, sex and discrimination represents an important function in recruiting and selection methods, as organizations have to abide by laws that have been passed by government. Hence in reference to the case study, departmental heads and subsequently the head of HR may have to employ methods such as Bio data to prevent any discrimination laws from being broken as this could lead to the business closure and legal proceedings. Forces within the external labour market may play a role in firms recruitment and selection shortages. In the field where Framley engineering operates, there is competition for recruitment of RD engineers, thus the business might have to look outside the shores of Britain for suitable engineers, which would be an advantage since 60% of its revenue is derived from exports. A mix of foreign expertise could be beneficial for creating innovative products to suit the export market. This as well could be a complicated process as cross-border legalities must be adhered and exhaustive background checks must be carried out. It is apparent when analysing external factors, there are a series of conditions that influence organizations in choosing the most suitable technique. What is constant in external factors is that business climates and market forces are rapidly evolving, more so businesses need to adapt in order to remain competitive. For example companies such as Tesco who frequently uses labour from Eastern Europe countries will have a change in their recruitment and selection policies which results in the need to adapt to the changes in macro environmental factors (as mentioned above). Conclusion An organization that does not promote a best practice procedure will not only recruit ineffectively but put the business at a risk of closure due to failings of the Human resources department. There must be a close rapport between Human resources department, departmental heads and the Director of engineering, to ensure the techniques used and the person specification fits the job role. Particularly, utmost care should be taken to when interviewing for the recruiter to adopt a neutral position in order to avoid such mistakes like the halo effect, stereotyping and preconceived judgements. It is lastly imperative that interviewers are properly trained and heads of HR are accountable to either successes or failures of recruitment and selection policies.
Letter From a Birminham Jail Essay -- essays research papers
Summary of ââ¬Å"Letter from Birmingham Jailâ⬠by Martin Luther King, Jr. In Martin Luther King, Jr.ââ¬â¢s Letter from Birmingham Jail, he responds to a letter entitled Statement by Alabama Clergymen. In Kingââ¬â¢s letter, he makes it clear that he does not usually answer letters of criticism, but because this one came from educated men he felt the need to clarify his purposes, actions, and goals of this civil rights campaign. King first states he is in Birmingham because he has affiliates there who asked him to come. His goal is to spread the word of freedom like Paul spread the Word of God. King and other African American leaders had tried to negotiate with city leaders, but only to be offered broken promises. Their only choice is to organize nonviolent campaigns and create enough tension so the city...
Tuesday, September 3, 2019
Teaching Adults: Is it different? :: Education School Essays
Teaching Adults: Is it different? The adult education literature generally supports the idea that teaching adults should be approached in a different way than teaching children and adolescents. The assumption that teachers of adults should use a different style of teaching is based on the widely espoused theory of andragogy, which suggests that "adults expect learner-centered settings where they can set their own goals and organize their own learning around their present life needs" (Donaldson, Flannery, and Ross-Gordon 1993, p. 148). However, even in the field of adult education, debate occurs about the efficacy of a separate approach for teaching adults. Some believe that adult education is essentially the same process as education generally (Garrison 1994) and therefore does not require a separate teaching approach: that is, all good teaching, whether for adults or children, should be responsive in nature. The question of whether teaching adults is different remains ambiguous. For example, research summarized in an ERIC Digest(Imel 1989) has shown that even those educators who say they believe in using an andragogical approach do not necessarily use a different style when teaching adults. Additional myths and realities related to teaching adults are explored in this publication. Two areas are examined: types of adult learning and what learners themselves want from teachers. Different Types of Adult Learning One way to approach the question of whether teaching adults is different is by examining the types of learning in which adults engage. Drawing upon the work of Habermas and Mezirow, Cranton (1994) classified adult learning into three categories: Subject-oriented adult learning-In adult learning contexts that are subject oriented, the primary goal is to acquire content. The educator "speaks of covering the material, and the learners see themselves as gaining knowledge or skills" (ibid., p. 10). Consumer-oriented adult learning-The goal of consumer-oriented learning is to fulfill the expressed needs of learners. Learners set their learning goals, identify objectives, select relevant resources, and so forth. The educator acts as a facilitator or resource person, "and does not engage in challenging or questioning what learners say about their needs" (ibid., p. 12). Emancipatory adult learning-The goal of emancipatory learning is to free learners from the forces that limit their options and control over their lives, forces that they have taken for granted or seen as beyond their control. Emancipatory learning results in transformations of learner perspectives through critical reflection (Mezirow 1991). The educator plays an active role in fostering critical reflection by challenging learners to consider why they hold certain assumptions, values, and beliefs (Cranton 1994).
Monday, September 2, 2019
Globalization and Drug Trafficking
Cheniece Bray Professor Hooper ENGL 1133 P19 12 November 2012 Annotated Bibliography II Working Title: Globalization and Drug Trafficking| Topic Description: Nations worldwide have been facing and losing the war on drugs for some time now. Innocent citizens are affected with the negative side effects due to drug trafficking such as violence resulting in death, lack of government assistance to halt the issue, and increase of crime rates.In this paper I would like to discuss the actions that can be taken to help stop drug trafficking worldwide, starting with one of the main drug routes from Mexico to the United States and other areas globally. I believe the war on drugs can be defeated if it is attacked by the government on every level federal, state, and local. | Working Thesis: What can be imposed to stop the violence and high crime rate related to drug trafficking and also decrease the flow of drugs across borders? | Source #1| Stout, R. (2012).Do the United States and Mexico Really Want the Drug War To Succeed? Monthly Review: An Independent Socialist Magazine, 63(8), 34. | This article stands out to me because it addresses one of my many concerns for this topic and that would be what is the government doing in order to defeat this war on drugs? Why is it so easy for drugs to travel past borders where government militia is stationed? Stout presents an argument in this article discussing what militarized efforts are being enforced to stop Mexican cartels as it seems like there is not much being done.Prosecution of offenders is not enough because even behind bars somehow kingpins still find a way for drugs to be distributed across the border into the United States. Most drug cartels ââ¬Å"financed the construction and operation of luxurious night clubs, gourmet restaurants, and gambling activities that attracted large numbers of U. S. residentsâ⬠(Stout, 2012, p. 2) making it very easy for individuals to gain access to these illegal drugs. | Source #2| Ei ght Steps to Effectively Controlling Drug Abuse And the Drug Market Retrieved from http://www. csdp. rg/news/news/8steps. htm| This online article offers many alternatives beside persecution that could be used to effectively control drug abuse and the control the striving drug market. I will use this article to help me with ideas of what policies would be best enforced inside Mexico to regulate cartels. The government is not achieving much in the war on drugs by simply putting the offenders in jail because that is costing them a lump sum of money along with the problem still ongoing because the offender will eventually get out and continue to do the same things.This article describes how the money being used to put offenders in jail could instead but used to treat, prevent, and educate offenders as the law enforcement should understand that their job is not enough to stop these powerful cartels. Drug trafficking is a problem and should be treated as one instead of a burden that cont inues to get recycled. | Source #3| Gleason C. (2008). Financial Cost of the War on Drugs Retrieved from http://suite101. com/article/financial-cost-of-the-war-on-drugs-a53068 | In this article Gleason demonstrates how much money is being spent to try and stop the war on drugs.This article will be useful to me because it will help me get a understanding of how much money is spent to house an inmate in jail who has been constantly convicted of using and selling illegal drugs, also providing and paying police officers with drug units to help stop drug trafficking. Gleason's article was useful and corresponded well the topic I chose over drug trafficking, although this article is biased it helped me formulate an opinion after I observed how much money the government has dispersed and seemingly wasted trying to prevent the use and movement of drug trafficking .This will be used in my research paper to give an example of the cost in the government trying to solve this ongoing problem. | Source #4| Jenner, M. S. (2011). International Drug Trafficking: A Global Problem with a Domestic Solution. Indiana Journal Of Global Legal Studies, 18(2), 901-927. | In this article Jenner explains many ways in which drug trafficking can be controlled, one of the ways Jenner discusses is the universal legalization of drugs.I will use this in my research paper as a policy that can be put into place to help eventually stop drug trafficking. Legalization would attack the drug market in a very sensitive matter; if drugs are legal the head ââ¬Å"kingpinsâ⬠of nations delivering narcotics, cannabis, and other drugs are unable to receive a profit from the drug trade therefore defeating the purpose of the whole process which is money and control. If this policy would ever be considered, control would then again be in the hands of the government and out of the violent drug cartels worldwide. |
Sunday, September 1, 2019
From a Chinese Perspective
Contemporary Art in China unravels as a budding butterfly out of its cocoon. Years of militant ruling and the imposition of state-centered concepts made contemporary art mundane and stagnant. At the onset of globalization, modern artists from China found more room to wiggle as they begin to showcase their talents in a more matured Chinese setting. Unable to resist the pressures of globalization, Chinese modern art has slowly opened up to the challenge set by global competitors as it hones its craft into the local and international scene with a distinctive Chinese mark. This new found freedom has resulted in emboldening Chinese artists to meld different mediums and points of view into their artwork, creating a time capsule that pays homage to the past and elucidates the future. Most of the world renowned Chinese artists such as Zhang Xiaogang, Zhang Huan, Ai Weiwei and Liu Xiaodong have made themselves visible because of their unique perspectives about Chinese life and I do not think that their creative impact would have been grand if it did not involve a disturbing quality, especially a distorted one. The function of these artists was not merely to beautify the tedious surroundings of modern China but to diversify its angle on Chinese culture, unfettered from the shackles of its restrictive past. In this respect, I believe that the responsibility of the contemporary artist lies in creating ripples within their immediate environment. I also deem that contemporary artists also have the opportunity to make use of modern tools in order to produce an artwork that is relevant in todayââ¬â¢s society of technological advancement and multiculturalism. I have had the prospect of visiting the Museum of Contemporary Art in Shanghai recently wherein the current theme was ââ¬Å"Couples in Contemporary Artâ⬠. It featured the artworks of 15 coupled artists in celebration of their varied outlook on gender and power relations between sexes. The artworks exhibited the use of different materials and mediums such as acrylic on canvas, watercolor on marble, bronze and stainless steel sculptures, ceramic and mineral color on silk among other things. I was specifically entranced by the works of the couple Chen Xioadan and Yang Jianping as they used bones and Silica gel for their artworks. It was the first time I had ever seen an exhibition wherein couples were involved so it was very interesting to see the polarities in their viewpoints. Another art showcase that I am very fond of is the selected paintings of Zhang Xiaogang in Charles Saatchiââ¬â¢s gallery. Although I have not been to London, I have seen some of his paintings online and in magazines and I believe his artworks depict our cultural past in its barest form. His paintings merge Asian and European techniques through his use of surrealism and portrait like images of the Chinese family. These artworks incorporate the aesthetics of traditional Chinese charcoal drawings, which give off hues of grey, black and white. A likeness to old photo studio shots, it illustrates the continuous link of the past to the present. The paintings demonstrate a timeless appeal that places emphasis on genealogical roots as each character is a mirror image of another, distinguished only by certain features or marks. The occasional interruption of such marks and colors indicate a focal viewpoint that Zhang had intended for the observer to ponder. The dream-like distortions of Zhangââ¬â¢s paintings signify a complex psychological dimension of Chinese culture in the past, as can be observed in the way the body parts were portrayed such as characters with big heads and eyes and small arms. These suggest narrative readings about personality and a claustrophobic sense of self as images distort the cultured past. Learning about Zhangââ¬â¢s artworks being patronized by people all over the world made me realize how China has matured in order to allow artists like Zhang to represent the country in the world of art. If it were not for globalization, many creative talents from China would still be bottled up in a trend of conformity. Outside influences has greatly affected the crafting of contemporary art in China, which has placed Chinese artists at par with their foreign counterparts. This is why I believe that being exposed to an environment where diversity of culture is encouraged and established among daily interactions could bolster the creative identity of an artist. Constructing art and interpreting its parameters establishes a concrete notion of the abstract realm. As an artist seeking approval from his or her peers, I regard that such activities that expand oneââ¬â¢s knowledge would also be culturally beneficial since I would be able to acculturate myself to the modern ways of western thinking and at the same time, impart my Chinese heritage to the fellow artists that I come into contact with. I trust that the network of people that will cross my path would also be able to contribute in strengthening cordial relations between the Chinese and the Americans. I believe that change is important for the growth of an individual artist as that is how creative identity is isolated and constructed. It would be interesting to see and learn from the different viewpoints and techniques of other artists, as well as the opportunity to handle challenges found in a multicultural setting. Such experiences will surely create an impression on my worldview as a Chinese and as a budding artist.
Subscribe to:
Posts (Atom)